|
|
Products > Minoura's Repair Stand > W-400
- Minoura's heavy-duty bike repair stand.
- A high-pressure gas cylinder system is used to assist you in lifting heavy bikes.
- Clamp jaw height is fully adjjustable between 750 and 1,305mm, making it easy to your position.
- SKU: 410-3000-00
Weight: 13.5 kgs
Push down the clamp arm while twisting the right side lever to move the clamp position enough low. You don't need to lift up heavy bike to the jaw position.
The clamp jaws is as same as for RS-5000 or W-3000 so you can operate with only one lever for opening/closing and adjusting.
High Position
Twist the right side lever to Release position, the high-pressure gas cylinder will help you to lift up the bike up to 10kgs power. It means you need only 5kgs power to life up a 15kgs bike.
After deciding the bike height, twist the lever to Lock position for lock the arm.
Lock Lever
The Lock Lever is located on the right side of the Clamp Arm.
It locks or releases the clamp arm by operating the gas cylinder valve.
For more products, please visit Minoura
