Products > Minoura's Repair Stand > RS-5000

RS-5000

Lightweight, folding alloy frame repair stand. Easy to carry and store. "Mega-Bite 2" clamp jaws insure easy operation in opening/closing by using only one lever.Our jaws rotate 360 degrees, insuring you the proper work angle. The jaws are also height adjustable between 940 and 1,510mm. (the description on our 2006 catalog is wrong) Set up and breakdown take mere seconds thanks to dual quick release levers. New mid frame tool tray (optional) has 24 holes and slots to hold the tools you use most. The tray also rotates around the stand so it's always where you need it to be. SKU: 410-2600-00 Weight: 5.0 kgs (w/o tray) / 5.5 kgs (w/ tray) Foldable Design RS-5000 is designed to be foldable very quickly. Just loosen two quick release skewers and backside knob on the clamp jaws, then you are ready to go. Thanks to its super-lightweight, rust-proof alloy body, you can bring RS-5000 to anywhere or easy and compact storage.     "Mega-Bite 2" Clamp Jaws Operation is very simple. Pull down the lever with large yellow knob, the jaws will oepn. Pull up the lever to close the jaws. Twist the yellow knob for adjusting the opening of the jaws. The new Mega-Bite 2 prevents the problem found on the previous RS-4000 that the lever comes off if you too much loosen the knob.   Adjustable Clamp Height The clamp jaw height is fully adjustable between 940 and 1,510mm with a quick release skewer. The jaws clamp up to 60mm diameter tubing so you can hold most bike frame and every seatpost. Rotating the jaws is quite simple. Push the right side locking lever, rotate the jaws, release the locking lever then your bike will be held firmly.   New Tool Tray The new Tool Tray has totally 24 holes and slots around the body for hooking the tools you need while maintenance. Angle Adjustable The angle of the Tool Tray is adjustable side by side for easier approach of you hand.

For more products, please visit Minoura